✅ Thermo linden lining Thermowood Production Ukraine

Thermal linden lining is a high-quality finishing material for cladding rooms that has undergone heat treatment and is produced in our production by removing moisture from the wood with proper adherence to all modes. As a result, linden lining acquires a beautiful noble color and an unusually attractive structure and appearance.

✅ Thermowood Production Ukraine's own production on certified equipment with full compliance with the entire technological cycle of thermal modification of wood thanks to a computer program without human intervention allows us to produce high-quality thermal wood.

Beware of counterfeits with low prices for thermal products - the quality of thermal wood in homemade thermal dryers, where the labor of a stoker is used and thermal modification cycles are often disrupted, is highly dependent on the human factor.

✅ Performance qualities of Thermowood Production Ukraine pine lining:

• service life 25 years, without release of resins during operation;
• beautiful appearance, high colorability;
• can be used in any weather conditions, is not afraid of water, precipitation and does not rot;
• environmentally friendly, thermal drying eliminates the shortcomings of natural wood without the use of chemicals;
• strength and reliability, resistance to temperature changes, retains heat;
• The low thermal conductivity of thermowood eliminates heating in the sun and maintains the temperature as much as possible;
• non-slip surface, light weight;
• stable geometry, resistance to deformation and warping.

 

 

✅ Thermowood in construction

Thermowood is natural wood that has undergone forced drying and roasting at high temperatures without access to oxygen. The drying temperature reaches 180-250 degrees, which exceeds the fire threshold of wood. This changes the structure of the material and evaporates the resins. For heat treatment, oak, ash, pine, and spruce wood are often used.

After such processing, the wood has a significantly higher class of quality and reliability. Drying removes excess moisture from the board. Technically correctly prepared thermowood has a moisture content of no higher than 6%. This is an almost perfect board!

🌳Where is thermally modified wood used?

Thermowood is intended for the construction of houses, baths, gazebos, summer terraces, country houses and children's indoor playgrounds.

Reliability, beautiful appearance, environmental parameters, as well as performance characteristics allow the material to be widely used.

🌳 Properties of thermowood

Thermal drying gives natural wood new technical advantages:

• environmental cleanliness;
• strength and reliability;
• durability;
• fire protection;
• resistance to deformation and warping;
• light weight;
• keeps warm;
• is not afraid of water, precipitation and does not rot;
• resistance to temperature changes;
• without release of resins during operation.

🌳 Processing of thermowood

• Pre-treatment of thermowood consists of impregnation with natural wax-based oils. This technology completely eliminates the use of aggressive chemicals that are harmful to health.
• Thermal drying in wood processing eliminates the shortcomings of natural wood without the use of chemicals. When roasted, the wood acquires an even shade throughout the entire depth of the board without staining or reagents. The color palette ranges from golden tones to deep browns.

🌳 Resistance of thermowood to aggressive influences

• Thermowood does not swell when moisture and condensation get on the surface, so it does not rot, and is resistant to mold and fungal growth.
• The high density and hardness of the board prevents damage from insects, parasites and rodents.
• The appearance does not deteriorate when exposed to aggressive external factors, seasonal temperature changes (heat or frost). It will also not swell or dry out from rain, snow or high humidity.

🌳 Thermal conductivity

• Has a high fire resistance class.
• The low thermal conductivity of the board eliminates heating in the sun and preserves the temperature created by the heated steam room as much as possible.

🌳 Wear resistance of thermowood

• Structures made from thermally modified wood are resistant to drying out.
• The structures are practically not subject to mechanical damage (no scratches or dents from impacts).
• All of the listed properties of thermowood are a guarantee of a long service life for houses and baths made of thermowood without additional processing.

🌳 Thermal wood price

The cost of thermal wood is slightly higher than that of regular dried boards. This is more than compensated by high performance characteristics that ensure long-term operation.

Bathhouses and houses made of thermowood do not require additional costs for cleaning or treatment products.

Structures made from this material are technically designed for year-round use in open space and do not require additional protection or maintenance.

Heat-treated wood is a reliable modern material for the construction of bathhouses, gazebos and houses!

🌳 Consultations from the thermowood manufacturer

You can get advice from an experienced technologist-expert in the industrial drying of thermal wood at the Promkontrakt production company.

We are a manufacturing enterprise, engaged in wood harvesting, industrial drying, thermal modification of wood, manufacturing molded products from thermowood, design and construction of houses and bathhouses from thermal timber.

🌳 Thermowood Production Ukraine - own production of thermally modified products.

Buy thermowood from the manufacturer:

☎️ (+380) 67-410-49-33 Viber, Telegram, WhatsApp

E-mail: 4104933@gmail.com

Delivery of the lining to the consumer is carried out inexpensively by passing transport or by carriers at low tariffs provided specifically for our company.